BMSVP - STYLE 340 & 340 BIL PACKING, MIL-P-24377A,

  • MSDS: BMSVP
  • Manufacturer: AMERICAN BRAIDING AND MFG CORP
  • Product Name: STYLE 340 & 340 BIL PACKING, MIL-P-24377A,
  • National Stock Number: 5330-00-197-9633
Product Identification

Product ID:STYLE 340 & 340 BIL PACKING, MIL-P-24377A,
MSDS Date:05/25/1990
FSC:5330
NIIN:00-197-9633
MSDS Number: BMSVP

Responsible Party
AMERICAN BRAIDING AND MFG CORP
247 OLD TAVERN ROAD
HOWELL, NJ 07731
US

Emergency Phone: 908-938-6333

Info Phone: 201-591-0725

Cage: 4R345

Contractor
CONAIR AVIATION ASSOCIATES
721 WILDWOOD, NJ 08260-4527 US

Telephone: 732-938-6333 ...FAX 6377

Cage: 2K255

Ingredients

ASBESTOS, CHRYSOTILE

CAS: 12001-29-5

RTECS: CI6478500

Fraction By Weight: 30% MIN

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 2 FIBERS/CC; A1;9192


NON HAZARDOUS INGREDIENTS

Fraction By Weight: BALANCE

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE HAZARDS ARE NOT EXPECTED WITH
THIS MATERIAL, EXCEPT FOR SKIN IRRITATION DUE TO TRAUMA. CHRONIC
HAZARDS IN ORDER OF INCREASING SEVERITY ARE: ASBESTOSIS, LUNG
CANCER, & MESOTHELIOMA, ALL OF WHICH ARE DISABLING AND FATAL
DISEASES OF THELUNG. INHALATION AND INGESTION OF ASBESTOS FIBERS
MAY CAUSE CANCER OF THE BOWEL.
Explanation of Carcinogenicity:ASBESTOS IS A KNOWN HUMAN CARCINOGEN.
Effects of Overexposure:FATIGUE AND SHORTNESS OF BREATH THAT GETS WORSE
WITH TIME AND EVENTUALLY BECOMES DISABLING.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA, AND TUBERCULOSIS
ARE ALL GENERALLY AGGRAVATED BY EXPOSURE TO ASBESTOS FIBERS.

First Aid

First Aid:SUPPORTIVE CARE AND TREATMENT OF TRAUMA ARE THE ONLY FIRST
AID PROCEDURES SUITABLE FOR EXPOSURE TO ASBESTOS.

Fire Fighting

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL AS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS. ABOVE 700F PTFE EMITS
FUMES THAT CAUSE FLU LIKE SYMPTOMS.

Accidental Release

Spill Release Procedures:VACUUM THE MATERIAL WITH A HEPA FILTERED
VACUUM. THE EQUIPMENT SHALL BE USED & EMPTIED SO AS TO MINIMIZE THE
RE-ENTRY OF ASBESTOS INTO THE WORKPLACE. OTHERWISE, WET THE
MATERIAL WITH WATER & SURFACTAN T AND THEN SHOVEL OR MOP UP
CONTAMINATION.

Handling

Handling and Storage Precautions:MATERIAL NONFRIABLE & WILL NOT SHED
FIBERS IN NORMAL USE AND STORAGE. AVOID PHYSICAL DAMAGE.
Other Precautions:IF IT IS NECESSARY TO CUT OR IMPACT THE MATERIAL,
WEAR A RESPIRATOR AND PROTECTIVE CLOTHING. USED MATERIAL SHALL BE
IDENTIFIED AND DISPOSED OF IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIO NS.

Exposure Controls

Respiratory Protection:WEAR A NIOSH/MSHA APPROVED HEPA RESPIRATOR IF
REQUIRED. WEAR SELF-CONTAINED BREATHING APPARATUS IF REQUIRED FOR
HIGH LEVELS OF CONTAMINATES.
Ventilation:LOCAL EXHAUST SUFFICIENT TO ENTRAIN ALL PARTICULATE
EMISSIONS. HEPA FILTER REQUIRED. NO LEAKS ON PRESSURE SIDE OF FAN.
Protective Gloves:COTTON OR LEATHER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:USE COVERALLS OR DISPOSABLE CLOTHING.
Work Hygienic Practices:WORK WET TO THE DEGREE POSSIBLE. WASH HANDS
AFTER HANDLING GASKET. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
ARRANGEMENTS SHOULD BE MADE TO REPLACE THIS MATERIAL WITH A SUBSTITUTE
THAT DOES NOT CONTAIN ASBESTOS.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.5
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE BRAIDED ROPE
Percent Volatiles by Volume:0 %

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALI
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:ASBESTOS DUST, PTFE FUMES

Disposal

Waste Disposal Methods:WET THE MATERIAL WITH WATER AND SURFACTANT.
PLACE IN 6 MIL THICK POLYETHYLENE PLASTIC BAG. PLACE THESE BAGS
INTO ANOTHER POLY BAG OR A SAFE PLACE UNTIL IT CAN BE SHIPPED TO AN
APPROVED DISPOSAL SITE. IDENTIFY WITH ASBESTOS CANCER WARNING
LABEL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.